Summary of Contents for StyleWell Quantum Flame WH200-23C1D-R
Page 1
THANK YOU We appreciate the trust and confidence you have placed in StyleWell through the purchase of this electric fireplace/heater. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents ..............2 Hardware Included ..............4 Safety Information ..............2 Package Contents ..............4 Important Safety Information ...........2 Assembly................5 Grounding Instructions .............3 Operation ................6 Warranty ................3 Using the Remote Control ............. 7 Pre-Installation ..............4 Care and Maintenance ............
Safety Information (continued) GROUNDING INSTRUCTIONS DANGER: Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product.
Pre-Installation ELECTRICAL SPECIFICATIONS □ Voltage: 120 V AC, 60 Hz □ Watts: 1400 Watts TOOLS REQUIRED Phillips screwdriver (not provided) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity Screw 12 + 3 extra PACKAGE CONTENTS Part Description Quantity Remote Control with Battery...
Assembly Attaching the metal trims □ Fasten the top trim (X) to the top of the fireplace insert (W) with two screws (ZZ). Make sure that the right angle side points towards the front of the unit. □ Align and attach two side trims (Y) to both sides of the fireplace insert (W) respectively with the right angle side facing the front of the unit, using two screws (ZZ) per trim.
Operation Identifying the control panel Using the main power button □ The control panel is located on the top right corner of the □ Press the power button (1) to turn the fireplace/heater unit on and fireplace/heater unit. off. Press the power button (1) once to turn the unit on. Press again to turn the unit off.
Using the Remote Control Installing the battery The battery is supplied with the remote control. The first thing to do with the remote control is to remove the plastic sheet insulated the battery. For replacement battery, use lithium-based CR2025 battery. Please follow the sequence below to replace the battery. □...
Care and Maintenance WARNING: Always disconnect from the power supply before cleaning the heater. First turn off the main power. Then remove the electrical plug from the wall outlet. WARNING: Do not use this fireplace insert if any part of it has been under water.
Page 9
Questions, problems, missing parts? Before returning to the store, call StyleWell Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Need help?
Do you have a question about the Quantum Flame WH200-23C1D-R and is the answer not in the manual?
Questions and answers