Selecting The Sound Mode (Depending On The Model) - Samsung SP-43T9HER Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➣
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side, depending on the model). If the mono sound comes
out only from left speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
Mono (Normal use)
NICAM Mono ↔ Mono
NICAM Stereo ↔ Mono
(Forced mono)
NICAM Dual-I →
NICAM Dual-II →
Mono
Mono
DUAL-I ↔ DUAL-II
Stereo ↔ Mono
(Forced mono)
ENG
37