Page 1
Infrared Remote Control TELEVISION STANDBY PICTURE SIZE/ TELETEXT SIZE SELECTION TUNER/CABLE NETWORK SELECTION ONE OR TWO-DIGIT CHANNEL SELECTION/ TELETEXT STORE VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF VOLUME DECREASE TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST MENU DISPLAY/ TELETEXT INDEX CONTROL THE CURSOR IN THE ON-SCREEN MENU SOUND EFFECT SELECTIOND...
Page 2
Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV.
Page 3
Connecting to the External Input/Outputs ➢ EXT 1 is used for the equipment with an RGB output, such as video game devices or video disc players. Rear of the TV ① This end can be fitted with: ◆ A SCART connector ◆...
Page 4
Connecting to the Audio Output ➢ The RCA (AUDIO-L and R) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system...
Page 5
Connecting to the RCA Input ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices. Side of the TV (depending on the model) Camcorder Video game device Video disc player...
Page 6
Connecting to the S-Video Input ➢ The S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV (depending on the model) ① Camcorder ①...
Page 7
Connecting to the Component Input Rear of the TV DTV receiver ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i, 576p, 1080i)
Need help?
Do you have a question about the SP-43R1HL and is the answer not in the manual?
Questions and answers