Happy Garden SAULE STO04 Manual page 10

SAULE
STO04
EN To fix the blind to the wall you will need the following items:
- drill + 14 mm concrete bit
- Level
- 14 mm, 17 mm and 19 mm spanners
- Stepladder
- Measuring tape
- Pencil
- Mallet
1: Choosing the location
When choosing a location, the angle of the awning's inclination must be taken into account.
We recommend that the front bar is at least 2.50m high when the awning is fully extended.
2: Marking the holes
Once the location of the awning is defined, mark the
locations of the fixing holes.
Make sure the holes are aligned and level.
Size
2.5x2m
3x2.5m
3.5x3m
4x3m
10
X
247cm
292cm
347cm
392cm
3: Drilling the holes and fixing
Once you have marked the location of the holes
you can drill, to do this use a 14mm concrete drill
bit and drill to a depth of 90mm.
Then insert the wall fixing plugs.
Then securely fix the blind brackets with the
screw and washer set.
Make sure the blind is secure and glued to the wall
before unfolding.
To unfold the blind insert the crank into the loop
and turn clockwise. The fabric should always be
taut when the awning is unfolded. When unfolded,
remember to remove the crank handle so that
children cannot play with the awning.
Turn in the opposite direction to fold it.
W
A
L
L
happy-garden.fr