Flavel Richmond Plus FOPC MN Series Installation, Maintenance & User Instructions page 42

Inset live fuel-effect gas fires
Table of Contents

Advertisement

ABOUT YOUR NEW FLAVEL RICHMOND PLUS GAS FIRE
The Flavel Richmond Plus coal effect gas fire incorporates a unique and highly
developed fuel bed which gives the realism of a loose coal layout combined with
realistic flames and glow. The use of durable ceramic material in the construction
of the fuelbed components ensures long and trouble free operation.
When first using the new fire a slight smell may be noticed. This is due to starch
used in the manufacture of the soft ceramic coals, it is non-toxic and will soon
disappear.
Please take the time to fully read these instructions as you will then be able to
obtain the most effective and safe operation of your fire.
IMPORTANT SAFETY INFORMATION
WARNING
This appliance has a naked flame and as with all heating appliances a
fireguard should be used for the protection of children, the elderly and
infirm. Fireguards should conform to B.S. 8423 : 2002 (Fireguards for use
with gas heating appliances).
It is important that this appliance is serviced at least once a year by a GAS SAFE
registered installer and that during the service the fire is removed from the fire
opening and the chimney or flue visually checked for fallen debris or blockages
which must be removed. The chimney should also be checked to ensure
clearance of flue products.
After installation or during servicing a spillage test must always be carried
out.
Rubbish of any type must NEVER be thrown onto the fuel bed, this could affect
safe operation and damage the fire. Any debris or deposits should be removed
from the fuel bed from time to time. This may be carried out by referring to the
cleaning section as described later in this book. Only the correct number and type
of coals must be used and only complete and genuine replacement sets must be
used. Always keep furniture and combustible materials well clear of the fire and
never dry clothing or items either on or near to the fire. Never use aerosols or
flammable cleaning products near to the fire when it is in use.
The ceramic fuel bed remains hot for a considerable period after use and
sufficient time should be allowed for the fire to cool before cleaning etc.
41

Advertisement

Table of Contents
loading

Table of Contents