Speedlink THEBE - Stereo Headset Quick Install Guide

Ports Overview

Buttons Overview

Features

Microphone

Utilization

1. Remove the protective caps and plug the headset's jack plugs into your soundcard. Make sure the headphone connector is plugged into the speaker output jack and the microphone connector is plugged into the microphone input jack on the soundcard.
2. Before placing the headset on your head, make sure the volume level on the in-line remote is set to minimum.
3. Adjust the length of the headband on both sides of the headset to suit the size of your head.
4. Adjust the microphone so it sits around 2 to 3cm from your mouth.