Speedlink MANDAS SL-860100-BK - Led Gaming Headset Manual

GET STARTED

• ON/OFF SWITCH
• VOLUME CONTROL
• MUTE MICROPHONE
• MICRO-USB CHARGING PORT
• 3.5mm AUDIO SOCKET

CHARGING

Connect the headset to a free USB port on your PC, gaming console or another USB power source, using the charging cable provided.
Please allow 10 hours of charging time before first use.

WIRELESS USAGE

Plug the USB receiver into a free USB port on your PC, PS5*, PS4* or Nintendo Switch* console and turn the headset on.
Headset and USB receiver will start pairing automatically, which is indicated by flashing LED light.
Once successfully paired, the LED light will remain lit.
When reaching low battery levels the headset will make a beeping sound.

WIRED USAGE

Connect the headset to your Xbox One* controller, smartphone, tablet or audio device, using the 3.5mm audio cable provided and turn the headset on.
During wired usage the audio levels can be adjusted using the connected device only.

POWER SAVING MODE

After 10 minutes of inactivity the headset will go into standby mode which is indicated by flashing LEDs. To reactivate the headset, press the volume button. After 5 minutes of standby mode the headset will go into sleep mode and needs to be switched off and on again to be reactivated.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Speedlink MANDAS SL-860100-BK - Led Gaming Headset Manual