Speedlink SONA SL-870300 - Bluetooth Chat Headset Manual

GET STARTED

BLUETOOTH* PAIRING AND CONNECTION

1. In off status press MFB (Multi-Function Button) for 2 seconds to enter pairing mode. Blue and red LED flash alternately.
2. Search and click to connect "Speedlink SONA" on your devices Bluetooth* list. LED changes to blue slow flash once connected.
   Some connection devices require password for pairing, please try 0000 or 8888 or 1111 or 1234.
3. To connect with a second device, follow step 1 and 2, then turn off Bluetooth* function on first device.
4. The Headset will enter pairing mode automatically with blue and red LED flash alternately. Turn on the Bluetooth* function of the second device to search and connect "Speedlink SONA". LED changes to blue slow flash after being connected.
5. Turn on the Bluetooth* function of the first phone; reconnect to "Speedlink SONA".
6. Headset is connected with two devices now.

Note: Music only can be played from one device under two connections, when you want to play music from another device, you need to pause or close the music of the previous device. The same operation during talking.

BASIC OPERATIONS

1. In off status, long press MFB for 2 seconds to power on. Headset will power on and enter paring mode automatically if do not have paring record (will enter reconnect mode automatically if have paring record).
   In on status, long press MFB for 3 seconds to power off.
   In off status, long press MFB for 2 seconds to power on and enter paring mode, or under unconnected standby mode to short press MFB.
2. Short press MFB to play and pause music.
3. In connected standby/playing music mode, double press MFB to dial the last call.
4. When during a call, press MFB for 2 seconds, then release for audio switch.
5. Call coming during call, short press the MFB to answer the new call and hang up the current call; Call coming during the call, double press the MFB to answer the new call and keep the current call; Call coming during the call, long press the MFB for 2 seconds to reject the new call. When you are on a three-party call, double press the MFB to switch audio between the current call and the keep call.
6. In connected standby/playing music mode, press MFB for 1 second then release for voice dialing.
7. When a call incoming, short press MFB to answer.
8. When during a call, short press MFB to hang up.
9. When a call incoming, press MFB for 1 second to reject a call.
10. Press the Volume + button short for Volume up
11. Press the Volume + button for 1 second for next song
12. Press the Volume - button short for Volume down
13. Press the Volume - button for 1 second for previous song
14. During a call press the "Mute the microphone button" short to mute. Press again to cancel

CHARGING

Please charge the Headset at once when the red LED flashes.
Charging time is about 1.5 hours. Red LED will turn off when fully charged.
Make sure the Headset is fully charged before the first use. Charge the Headset at least one time every two months when it is not used. Please note that is it not recommended to use the Headset frequently when charging, otherwise it may affect the life of the battery