Table of Contents
Advertisement
®
R&S
RT‑ZM
2
Product description
The R&S RT-ZM is a modular probe consisting of a probe amplifier and various
probe tip modules for different applications.
The R&S RT-ZM probe family features the MultiMode function which allows you
to switch between single-ended, differential and common mode measurements
without reconnecting or resoldering the probe.
With different tip modules and tip cables, the R&S RT-ZM probe can be connec-
ted to a wide variety of devices under test (DUT) and is suitable for various mea-
surement tasks.
Provided with special features such as the R&S ProbeMeter and the micro button,
the R&S RT-ZM is designed to meet tomorrow's challenges in probing.
The probe is equipped with the Rohde & Schwarz probe interface. It can be con-
nected to any Rohde & Schwarz instrument that is compatible with this interface.
When connected to the front panel, the probe is controlled by the oscilloscope's
software. Supported oscilloscopes are listed in the data sheet.
2.1
Key characteristics and key features
2.1.1
Key characteristics
The key characteristics of the probe are the following:
MultiMode feature for differential, common mode and single-ended measurements
Two different probe gain settings with 10:1 and 2:1 attenuation to achieve low system noise
Bandwidth
Dynamic range
User Manual 1419.3128.02 ─ 05
Key characteristics and key features
DC to 1.5 GHz (R&S RT‑ZM15)
DC to 3 GHz (R&S RT‑ZM30)
DC to 6 GHz (R&S RT‑ZM60)
DC to 9 GHz (R&S RT‑ZM90)
DC to 13 GHz (R&S RT‑ZM130)
DC to 16 GHz (R&S RT‑ZM160)
±2.5 V (10:1 attenuation)
±0.5 V (2:1 attenuation)
Product description
9
Advertisement
Table of Contents
