R&S RT-ZM User Manual page 34

®
R&S RT‑ZM
Figure 4-1: Input voltage at probe tip
The R&S RT-ZM probes have three input terminals: the positive signal input (+),
the negative signal input (-), and ground.
Figure 4-2: Displayed voltage on oscilloscope screen
The setting of the probe mode is part of the probe settings of the channel to which
the probe is connected. You can also configure the micro button at the probe
amplifier to select the "Probe Mode". For more details, see the oscilloscope's user
manual.
The MultiMode feature is not supported by R&S RT‑ZMA30 browser module
because there is no ground connection.
User Manual 1419.3128.02 ─ 05
Features and characteristics of modular probes
MultiMode
34