R&S RT-ZM User Manual page 47

®
R&S RT‑ZM
Figure 5-1: QR code to the Rohde & Schwarz support page
5.3 Returning for servicing
Use the original packaging to return your R&S RT-ZM to your Rohde & Schwarz-
service center. A list of all service centers is available on:
www.services.rohde-schwarz.com
If you cannot use the original packaging, consider the following:
1. Use a sufficiently sized box.
2. Protect the product from damage and moisture (e.g. with bubble wrap).
3. Use some kind of protective material (e.g. crumpled newspaper) to stabilize
the product inside the box.
4. Seal the box with tape.
5. Address the package to your nearest Rohde & Schwarz service center.
5.4 Calibration interval
The recommended calibration interval for R&S RT-ZM modular probe is two
years. For servicing, send the probe to your nearest Rohde & Schwarz service
center (see Chapter 5.3, "Returning for
User Manual 1419.3128.02 ─ 05
Maintenance and service
servicing", on page 47).
Calibration interval
47