Table of Contents
Advertisement
Important
Clearances while the heater is operating
This appliance must not be installed where
curtains or other combustible materials could
come into contact with it. In some cases
curtains
may need
restraining.
Outside flue terminal
Keep flammable materials, trees, shrubs, etc.
away from the flue terminal. In areas subject
to heavy snowfall, keep snow clear of the
flue terminal at all times.
Filters
During peak operating periods the filter(s)
should be cleaned weekly. If the 'Filter'
warning indicator flashes on the control panel
display, immediately turn off the appliance
and when the heater has cooled, clean the
filter(s) before starting
again.
Energysavers must not be built into bookcases or walls etc.
Energysavers are not recommended for installations in unusually dusty environments such as hair
salons or where there are a large number of pets—this will cause continual blockage of the filter(s).
1000 mm
50 mm
Snow
Filter
On
On/Off
Floor protection
Energysavers discharge a large volume
of warm air at a low level. Heat over
time may affect the appearance of some
flooring materials, such as, carpet, vinyl,
cork, or timber. To avoid this occurring, it is
recommended that
a mat be placed
in front of the
appliance.
50 mm
Outside flue terminal
On cold days steam may be discharged
from the flue terminal. This is normal with
high efficiency gas appliances like the
Energysavers and does not indicate a fault.
Humidifier tray
Do not overfill—there is a maximum water
level indicator in the tray. Also do not fill while
the heater is operating, more information on
p.10.
Humidifier tray
Max.
fill line
Filler spout
Access
panel
Max.
fill line
Access
panel
Humidifier tray
At least
750mm
7
Advertisement
Table of Contents
