Table of Contents
Advertisement
3.2.3 AC power input and power cord
The AC power input connectors are located on the rear side of the chassis. The AC connector type is
C14, and the power cords are shipped with the chassis.
NOTE: The PSU AC input range: 100 to 264V rms.
Figure 3-6: AC input connectors
3.2.4 PSU Assembly
The appearance of PSU is shown as below:
Figure 3-7: PSU module
3.2.4.1 PSU Installation
1)
Rotate the handle, shown in Figure 3-7, to a 90° angle.
2)
Keep pressing the latch
3)
Lower the handle to a 0° angle
, shown in Figure 3-8, and hold the handle to push the PSU into the chassis
.
51
.
Advertisement
Table of Contents
Troubleshooting
