Table of Contents
Advertisement
Figure 3-16: DC-DC module and status LED
●
DC-DC module LED (Green)
o
On – Power on, normal operation
o
Off – Power off
If DC-DC module fails, it will result in the Enclosure Fault amber LED (on the front bezel) being lit. See Table 1-1.
3.4.1 DC-DC Installation
1)
Press the latch
2)
Continue pushing DC-DC module until you hear a click.
Figure 3-17: Install DC-DC into chassis
, while slide DC-DC module into the chassis
.
56
Advertisement
Table of Contents
Troubleshooting
