Table of Contents
Advertisement
2.5.3 Insert the Chassis to Rack
Caution: The most important steps are here for a successful and safe installation of the rail kit with chassis to the
rack.
Slide the outer rail extension out until it locks in the fully extended position.
Both left and right outer rails should be fully extended and locked. Ensure the ball bearing retainer is locked at
the front of the outer rail extensions. Please refer to the alignments below.
Aim the rear end of inner rails on both sides at the outer rail extensions and insert the chassis horizontally to
the outer rail extensions. Make sure the inner rails slide into the grooves correctly.
23
Advertisement
Table of Contents
Troubleshooting
