Using Your Zotac Zbox Nano; Configuring A Wireless Connection - Zotac ZBOX C Series User Manual

• Wireless Network Driver
• Bluetooth Driver
• Intel Management Engine
• CardReader Driver
• Intel Thunderbolt Driver
Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX

nano.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.

Using your ZOTAC ZBOX nano

Configuring a wireless connection

Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notification
area.
2. Select the wireless network you want to connect to from the list
and click Connect.
3. After connection is established, you will see "Connected."
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
ZOTAC ZBOX nano
21