Toro 72902TE Operator's Manual page 50

6. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
60).
Figure 60
7. Start the engine and drive to a flat area.
8. Check the oil level again.
Changing the Engine-Oil Filter
1. Drain the oil from the engine; refer to
(Figure
the Engine Oil (page
2. Change the engine-oil filter
g235264
Note:
the engine, and then turn the oil filter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil; refer to
50
49).
(Figure
Figure 61
Ensure that the oil-filter gasket touches
Engine-Oil Specifications (page
Changing
61).
g008804
g027477
48).