Table of Contents
Advertisement
Figure 32
1. Anti-scalp roller
2. Spacer
3. Bushing
Machines with Rear Discharge
Whenever you change the height of cut, it is
recommended to adjust the height of the anti-scalp
rollers.
1.
Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Adjust the anti-scalp rollers as shown in
33
and
Figure
34.
Figure 33
1. Flange nut
2. Anti-scalp roller
g029957
4. Flange nut
5. Bolt
Figure
g024242
3. Bushing
4. Bolt
1. Bolt
2. Bushing
33
Figure 34
3. Anti-scalp roller
4. Flange nut
g024243
Advertisement
Table of Contents
