Toro 72902TE Operator's Manual page 16

is running. Use these times for scheduling regular
maintenance (Figure 6).
1. Fuel gauge (bars)
2. Battery light
3. Hour meter
Fuel Gauge
The fuel gauge is located within the hour meter, and
the bars light up when the key switch is in the O
position (Figure 6).
The indicator light appears when the fuel level is low
(approximately 1 gallon remaining in the fuel tank).
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly (Figure
Battery-Indicator Light
If you turn the key switch to the O
few seconds, the battery voltage displays in the area
where the hours are normally displayed.
The battery light turns on when the key switch is
turned on and when the charge is below the correct
operating level (Figure
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction
Neutral-Lock Position
Move the motion-control levers outward from the
center to the N
EUTRAL
Figure 6
4. Safety-interlock symbols
5. Low fuel indicator light
6).
position for a
N
6).
(Figure
- position when exiting
LOCK
the machine
motion-control levers into the N
when you stop the machine or leave it unattended.
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
Fuel-Shutoff Valve
Close the fuel-shutoff valve when transporting or
storing the machine; refer to
Valve (page 37).
g008950
N
4).
16
(Figure 25). Always position the
EUTRAL
Using the Fuel-Shutoff
- position
LOCK