Technical Information; Installation Considerations; Product Safety Notes - Hans Grohe Croma Select E 180 EcoSmart 27257001 Installation/User Instructions/Warranty

English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - showerhead
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

Inspect the showerpipe for shipping dam-
age before installation. Claims for ship-
ping damage made after the showerpipe
is installed will not be honored.
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Do not install this showerpipe in a steam shower.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• The installation dimensions shown in this installation
instruction are ideal for people of approximately
6' in height. The dimensions can be changed if
required. In this case, the minimum ceiling height
of 89¼" from the standing surface, and all other
measurements, must be changed.
• Make sure that the wall is strong enough to support
the showerpipe. The wall must be reinforced at the
mounting points.
• The area where the top mounting piece is to be
installed must be flat and free of protruding grout
joints, etc.
• The enclosed screws and anchors are suitable for
a solid surface wall. For other wall constructions,
select mounting hardware and reinforcement
suitable for that specific construction.
2
15 - 75 PSI
145 PSI
120° - 140° F*
176°F*
2.0 GPM max.
2.0 GPM max.
• This showerpipe requires showerpipe rough
• To prevent scald injury, the maximum output
• Keep this booklet and the receipt (or other proof

Product Safety Notes

• The purpose of the shower arm is to support the
• Do not use the showerpipe as a grab bar. Using the
16181181(not included).
temperature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum output
temperature can be no higher than 112° F.
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
showerhead only. Do not use it to support other
objects.
showerpipe as a grab bar may result in injury or
product damage. If a grab bar is required, purchase
and install one separately.