Philips SpeechExec Pro Dictate 11.5 User Manual page 27

• Send for correction: The dictation
file is moved to the Finished
dictations folder and the status
is set to Correction pending. A
text document (.rtf) containing the
transcribed text is attached to the
dictation file.
• Save as draft: Mark a recording as
suspended to temporarily interrupt
recording and finish it later. The
recording is saved in the Suspended
folder.
Offline speech recognition
Record a dictation on your dictation
recorder and have your dictation files
transcribed by Dragon after downloading
them from your dictation recorder to
SpeechExec.
1
Download a previously recorded file
from your Pocket Memo or SpeechAir
(see Download recordings from
a dictation recorder) or create a
new dictation file in SpeechExec by
selecting New
or the File menu (see
recording).
2
Select one or more dictation files from
the work list.
3
Click the Add to Dragon speech
recognition queue button on the
toolbar to queue the selected files for
speech recognition in the Recognition
and adaptation queue panel.
4
Start recognition queue
Click the
button in the Recognition and
adaptation queue panel to start the
speech recognition process.
User manual
from the toolbar
Create a
X When the speech recognition
process is finished, the dictation
file is moved to the Finished
dictations folder and the status
is set to Correction pending. A
text document (.rtf) containing the
transcribed text is attached to the
dictation.
Note
• The name of the user profile in
Dragon NaturallySpeaking must be
identical to the SpeechExec author
name and the author name used for
recordings on a handheld dictation
recorder. The speech recognition
software cannot recognize dictations
if the Dragon profile name and the
author name differ. In this case,
contact your administrator.
• Speech recognition is not supported
for the following dictation files:
• .wav files with a sampling rate of
less than 11kHz.
• Encrypted dictations
27