Download Print this page

California Proposition 65 Warning - QuickJack 6000ELX Service Manual

Hide thumbs Also See for 6000ELX:

Advertisement

Quickjack 6000ELX Product Labels
I
CAUTION
POSITION JACK FRAMES UNDER PARKED
VEHICLE. NEVER DRIVE OVER OR ON TOP
OF JACK FRAMES.
PN 5905432
MISE EN GARDE
PLACER LES CADRES DE LEVAGE SOUS
LE VÉHICULE STATIONNÉ. NE JAMAIS
ATTENTION
ROULER SUR OU AU-DESSUS DES
CADRES DE LEVAGE.
J
QuickJack is a wholly-owned subsidiary of BendPak, Inc.
MODEL NUMBER / NUMÉRO DE MODÈLE
DESCRIPTION
LIFT CAPACITY (PAIR) / CAPACITÉ DE LEVAGE (PAIRE)
DATE CODE / CODE DATE
SERIAL NUMBER
NUMÉRO DE SÉRIE
DANGER!
Disconnect Power Before Servicing
Couper l'alimentation
avant toute intervention.
WARRANTY VOID IF DATA PLATE IS REMOVED
MADE IN CHINA / FABRIQUÉ EN CHINE
GARANTIE NULLE SI LA PLAQUE DE DATE A ÉTÉ ENLEVÉE
K
CALIFORNIA PROPOSITION 65
WARNING
WARNING! This product can expose
you to chemicals including styrene and
vinyl chloride which are on the list of
over 900 chemicals identified by the
State of California to cause cancer,
birth defects or reproductive harm.
ALWAYS use this product in accordance
with the manufacturer's instructions.
For more information, go to
www.p65warnings.ca.gov.
PN 5905775
IMPORTANT: Please use materials as instructed
Caution Do Not Drive Over-ENG/FRE.pdf
Trim: 3"W x 3.5"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Finish: Matte Overlaminate
Ink: U.V. protected CMYK 4/C Process
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear laminate non-glare medium matte over-laminate (No gloss) for
abrasion, chemical, and ultra violet protection.
PN 5905432
QuickJack Serial Tag-ENG/FRE
1645 Lemonwood Dr.
Santa Paula, CA USA
Trim: 3"W x 3"H
Material: 2 Mil. Matte Silver Polyester (Flex-PSE)
Print using thermal transfer printer with resin ribbon
UPC / CUP
Place on Left Frame Only
PN 5905433
PN 5905433
Prop_65_Label.pdf:
Size: 1.5"W x 1.5"H
Material: 4 Mil. Permanent White Adhesive Vinyl
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No gloss)
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear laminate non-glare medium matte over-laminate (No gloss)
for abrasion, chemical and ultra violet protection.
Place on Both Frames

Advertisement

loading

This manual is also suitable for:

5175650