Operation And Alignment; Location Of The Operation And Alignment Controls; Figure 5: Location Of The Operation And Alignment Controls - Siemens SCD 1297-C1 Operating Instructions Manual

3 Operation and Alignment

This chapter contains a description of all the operating and alignment functions.

3.1 Location of the Operation and Alignment Controls

All the controls are accessible from the rear of the unit. Their exact position in shown in Figure 1 on
page 32. These controls are used for navigating in the OSD menu and for selecting and altering
parameters.
S1
S2
S3
S4

Figure 5: Location of the operation and alignment controls

S1
S2
S3
S4
LCD-Monitor SCD1297
VGA-interface
+
-
Menu
Set
Touchscreen (option)
and service connector
Page 13 / 19
Power supply
DOC-No.: B3 0071D1.DOC