Operation And Alignment; Location Of The Operation And Alignment Controls; Fig. 3: Location Of The Operation And Alignment Controls - Siemens SCD 1597-E Manual

Operating Instructions
3

Operation and Alignment

This chapter contains a description of all the operating and alignment functions.
3.1

Location of the Operation and Alignment Controls

All the controls are accessible from the rear of the unit. The exact position is shown in
Fig. 1, Fig. 2 and Fig. 3. These controls are used for navigating in the OSD menu and for
selecting and altering parameters.

Fig. 3: Location of the operation and alignment controls

The functions of the keys are described in chapter 3.2.1 and 3.2.2.
Page 37 / 44
LCD-Monitor SCD 1597 DOC-No.: B30142DE4.DOC