Status Info - wtw IQ SENSOR NET NiCaVis 705 IQ NI Operating Manual

NiCaVis 70x IQ NI

Status info,

general structure
Status info
NiCaVis 70x IQ NI
ba75988e01 11/2012
9.2 Status info
The status info is a coded piece of information on the current status of
a sensor. Each sensor sends this status info to the controller. The sta-
tus info of sensors consists of 32 bits, each of which can have the value
0 or 1.
0 1 2 3 4 5 6 7
1 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
16 17 18 19 20 21 22 23
The bits 0 - 15 are reserved for general information.
The bits 16 - 21 are reserved for internal service information.
You obtain the status info:
 via a manual query in the
menu (see system operating manual)
 by an automated query
– of a superordinate process control (e. g. when connected to the
Profibus)
– of the IQ Data Server (see operating manual of the
IQ S N
ENSOR ET
The evaluation of the status info, e.g. in the case of an automated
query, has to be made individually for each bit.
Status bit Description
Component hardware defective
Bit 0
Component hardware defective
Bit 1
Optical measuring range exceeded
Bit 2
Bit 3-31 -
8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
24 25 26 27 28 29 30 31
Settings Service
/
software pack)
Indexes
(general)
(internal)
List of all components
/
xxx
9 - 5