Faema CARISMA S-1 Use And Installation page 34

Prior to installation, make sure there is a circuit breaker installed with a distance between the contacts
that allows for complete disconnection when there is a category III overload and that provides
supply in compliance with installation rules.
caused by the lack of an earthing system on the electrical supply.
Do not use adaptors, multiple plugs, and/or extension cords.
Check that the type of connection and voltage correspond with the information on the nameplate: see
WATER REQUIREMENTS
Water used in coffee machines must be potable and suitable for human consumption (see laws and regulations in force).
Check on the machine's water inlet that the pH and chloride values comply with current law.
If the values do not fall within the limits, an appropriate water treatment device must be inserted (respecting the local laws
and compatible with the machine).
according to the hardness detected and machine usage.
WARNING
Only use the supplied parts for installation. If other parts are installed, they must be new (not used) and
they must be able to come in contact with potable water suitable for human consumption (according
to local laws in force).
WATER CONNECTIONS
reservoir (see
to the relative supply tube (see
Hook up the water connections as shown, respecting the hygiene, water safety, and anti-pollution laws in the country of
installatio
3. Electrical Installation Rules 3. Electrical Installation Rules
.
4. Water Installation Rules
) before turning ON the machine and make sure that the softener is attacched
).
4 EN