Option B: Speakers Without Ncs - BRP VIBE User Manual

B. VIBE COMMUNICATION SYSTEM
A.6. Using the Velcro . , position and fix
the speaker inside the NCS.
A.7. Reinstall the NCS into the helmet,
making sure the openings are at the
base of the helmet and the speaker
cable is pointing toward the back of the
helmet.
A.8. Reconnect the speaker cable with
the BLACK female connector from the
main unit. Repeat on the other side.

4.2. OPTION B: SPEAKERS WITHOUT NCS

B.1. Remove the NCS from the helmet
(held by Velcro).
B.2. If no configuration with the NCS
feels comfortable, the NCS can be
removed from the helmet and replaced
with the speaker.
B.3. Make sure the speaker wire is
pointing toward the back of the helmet.
B.4. Adjust the speaker position in the
helmet to maximize comfort and sound
quality. Repeat on the other side.
8