Option C: Speakers With Ear Pad; Microphone Installation; Cable Management - BRP VIBE User Manual

B. VIBE COMMUNICATION SYSTEM

4.3. OPTION C: SPEAKERS WITH EAR PAD

C.1. Remove the EarPad from the
helmet (held by Velcro).
C.2. Remove the foam cut out on the
back of each EarPad by ripping the
center circle portion.
C.3. Install the speaker into the EarPad
from the back.
C.4. Reinstall each EarPad into the
helmet, make sure the cable is pointing
toward the back of the helmet.
C.5. Adjust Each EarPad position in the
helmet to maximize comfort and sound
quality.

5. MICROPHONE INSTALLATION

1. Take the adhesive Velcro from the
accessories box supplied with your
VIBE.
2. Install the Velcro and apply uniform
pressure on the adhesive.
3. Position the microphone on the
Velcro installed at previous step on
TM
the inner right side of the helmet, guide
the different wires to keep them out of
reach.
4. Pass the wire in the intended groove
and secure it with the two (2) Velcro
straps.
5. Make sure the RED connector is
plugged the right way with the arrow
pointing to the Sena logo.

6. CABLE MANAGEMENT

1. Place the connectors and cables in
the cavity next to the main unit.
9