Sena Device Manager; Charging; Checking The Battery Level; Renaming Device - BRP VIBE User Manual

C. GETTING STARTED

2. Sena Device Manager

The Sena Device Manager allows you to upgrade firmware and
configure settings directly from your PC.
•Download the Sena Device Manager at oem.sena.com/brp/.
VOX sensitivity
VOX Sensitivity can be adjusted depending on your riding environment. It
will be possible to adjust the sensitivity of the microphone with this
parameter. If your environment is noisy, lower the sensitivity. If the
microphone does not pick up your voice easily, increase the parameter.
On a Can-Am On-Road Vehicle, BRP recommends using a VOX
sensitivity of "5", on a SkiDoo, BRP recommends using a sensitivity of "2".

3. Charging

To charge your device, plug the included USB C cable into the USB C
port on the Vibe (located at the back of the helmet).
Note:
• The VIBE communication product will not charge if the system is on
but will let you use it while it is plugged in. You need to turn off the VIBE
communication system to charge it.
• Any 3rd party USB charger can be used with this product if the
charger is approved by either the FCC, CE, IC, or other locally
approved agencies. BRP recommends using a 1 Amp charger to use
the fast-charging capability of your VIBE.
• Use of a non-approved charger may cause fire, explosion,
leakage, and other hazards which may also reduce the lifetime or
performance of the battery.
WARNING
BRP recommends keeping your Vibe system under surveillance while
charging the battery.
• The headset is compatible with 5 V input USB-charged devices only.

4. Checking the battery level

To check the battery level on your Vibe, Open the BRP GO! app and go
into the Device \ MY DEVICE menu.

5. Renaming device

To rename your device, Use the BRP GO! app and go into the Device
menu.
11