BN68-00528A-01_ENG
2003.11.20
ENG
Color System
Mode
Adjust
Color Tone
Size
Digital NR
Move
Adjust (Dynamic)
Contrast
Brightness
Sharpness
Color
Move
Adjust
Color System
Mode
Adjust
Color Tone
Size
Digital NR
Move
4:14 PM
Page 18
Adjusting the Picture Settings
Your PDP has several settings which allow you to control picture
quality.
Picture
œ œ AUTO √ √
œ œ Dynamic √ √
√ √
œ œ Normal √ √
Wide
œ œ Off √ √
Enter
Return
4
100
45
75
55
Store
5
Picture
6
œ œ AUTO √ √
œ œ Dynamic √ √
√ √
œ œ Normal √ √
Wide
œ œ Off √ √
Enter
Return
18
1
Press the MENU button.
Result:
The options available in the Picture group are
displayed.
Press the √ button.
2
button to select Adjust. Press the √ button.
3
Press the
or
Result:
The Adjust menu is displayed.
Press the
or
button to select the option (Contrast,
Brightness, Sharpness, Color, Tint-NTSC only) to be
adjusted. Press the œ or √ button.
Result:
The horizontal bar is displayed. Move the horizontal
bar's cursor left or right by pressing the œ or √ button.
When you are satisfied with the settings, press the
store them.
Press the MENU button.
Result:
The options available in the Picture group are
displayed again.
7
Press the
or
button to select Color Tone. Select the option
by pressing the œ or √ button. The color tones are displayed in
the following order.
Normal - Warm1 - Warm2 - Cool2 - Cool1
If you make any changes to these settings, the picture
mode is automatically switched to the Custom.
button to