■ Information: Display a show you have reserved
to watch. (You can also change the reservation
Alternatively, you can view Information by
highlighting a program and pressing the
■ Select All / Deselect All: Select or deselect all reserved
(analog channels only)
If the reception is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, fine tune
the channel manually. Scroll to the left or right until the image
Settings are applied to the channel you're currently
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Changing the Preset Picture Mode
MENUm → Picture → Mode → ENTERE
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal environment.
■ Movie: Suitable for watching movies in a dark room.
Adjusting Picture Settings
MENUm → Picture → ENTERE
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several options for adjusting picture
quality. Select an option using the up and down arrow keys,
and then press ENTER. Use the arrow keys to adjust the
option value or select an option setting. When done, press
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R), the
OSD will be adjusted accordingly.
Settings can be adjusted and stored for each
external device connected to the TV.
You can adjust and store Settings for each external
device connected to the TV.
Changing the Picture Options
MENUm → Picture → Advanced Settings →
All Advance Settings are available in the Standard and
Movie modes. In PC mode, you can only make changes to
Gamma and White Balance.
To use, select an option using the up and down arrow keys,
and the press ENTER. Use the arrow keys to change value
or setting, and then press ENTER.
■ Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.
■ Dynamic Contrast (Off / Low / Medium / High):
Adjusts the screen contrast.
■ Gamma: Adjust the primary color intensity.
U Move E Enter R Return