Selecting The Color System (Video Or S-Video Mode); Changing The Picture Mode - Samsung PS-42P3ST Owner's Instructions Manual

BN68-00528A-01_ENG 2003.11.20
Selecting the Color System
Preset to the Video or S-Video mode by using the SOURCE button.
If necessary, select the broadcasting standard which best
corresponds to your viewing requirements.
1 Press the MENU button.
Result: The options available in the Picture group are
displayed.
Press the √ button.
2
Result: The Color System is selected.
3 Select a required color system by pressing the œ or √ button.
Result: The following color systems are available.
AUTO - PAL - SECAM - NTSC4.43 - NTSC3.58 -
PAL M - PAL N - PAL60

Changing the Picture Mode

You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result: The options available in the Picture group are
displayed.
Press the √ button.
2
3 Press the or
pressing the œ or √ button.
Result: The following modes are available depending on the
input source.
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
4:14 PM Page 17
button to select Mode. Select the option by
Dynamic - Standard - Movie - Custom
Custom - High - Middle - Low
(PC or DVI Mode)
(Video or S-Video Mode)
Picture
œ œ AUTO √ √
Color System
œ œ Dynamic √ √
Mode
√ √
Adjust
œ œ Normal √ √
Color Tone
Size Wide
œ œ Off √ √
Digital NR
Move Sel. Return
Picture
œ œ AUTO √ √
Color System
œ œ Dynamic √ √
Mode
√ √
Adjust
œ œ Normal √ √
Color Tone
Size Wide
œ œ Off √ √
Digital NR
Move Sel. Return
17
ENG