Care And Maintenance; Troubleshooting; Warranty - Utilitech UC1139-WHG-12LF0-U Manual

CARE AND MAINTENANCE

Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner and soft cloth. When cleaning the fixture,
make sure the power is turned off. Do not spray cleaner directly onto any part of the fixture or LEDs.

TROUBLESHOOTING

PROBLEM
Light does not come on.
Fuse blows or circuit breaker
trips when light is turned on.

WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (5)
years from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or re-
tail application. The warranty is limited to use in a residential environment. We will repair or replace (at our option) the
unit in the original color and style if available, or in a similar color and style if the original item has been discontinued,
without charge. Defective units must be properly packed and returned to the manufacturer with a letter of explanation
and your original purchase receipt showing date of purchase. Call 1-866-994-4148 to obtain a return authorization
number and an address where to ship your defective product. Note: C.O.D. shipments will NOT be accepted. The
liability of the manufacturer is in any case limited to replacement of the defective light fixture product. The manufac-
turer will not be liable for any other loss, damage, labor costs or injury which is caused by the product. This limitation
upon the liability of the manufacturer includes any loss, damage, labor costs or injury which is (I) to person or property
or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty, contract, negligence, strict
liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product. This warranty
gives you specific rights, and you may also have other rights which vary from state to state.
POSSIBLE CAUSE
1. Power/ light switch is off.
2. Fixture not properly wired to junction box.
3. Bad switch.
1. Discontinue use.
7
CORRECTIVE ACTION
1. Verify power supply and light
switch are on.
2. Check wiring connections.
3. Test or replace switch.
1. Call customer service.