Advertisement
Available languages
Available languages
4
Insert the replacement bulb into the socket and
twist the bulb clockwise until the bulb locks into
place (Fig. 3). Do not force the bulb into the
socket or twist forcefully.
5
Reattach the diffuser following the same
instructions in Step 2, except screw the
diffuser onto the pan in a clockwise direction.
Make sure the diffuser is fully attached onto the
pan before releasing your hands. Restore
power to the fixture.
BULB BASE
Contact Pins
CARE AND MAINTENANCE
Your fixture is made from quality materials that will last for many, many
years with minimum care. You may want to periodically clean the fixture
using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use
solvents or cleaners containing abrasive agents. When cleaning the fixture,
make sure you have the power turned off and do not spray liquid cleaner
directly onto the bulb, socket, ballast, or wiring.
TROUBLESHOOTING
Minor problems often can be fixed without the help of an electrician. Before
doing any work on the fixture, shut off power supply at the circuit breaker
panel to avoid electrical shock.
Problem
Cause
Fixture doesn't light Defective bulb
Power is off
Bad wire connection
Circuit breaker trips Check circuit breaker
when light is
or wall switch
turned on
REPLACEMENT PARTS LIST
Keep this guide handy for ordering replacement parts.
Hardware Kit
HDW4018
NEED HELP?
In the event you are missing a part or have questions regarding installation
please visit our website at www.goodearthlighting.com/support.html
or call the Customer Care Center 1-800-291-8838.
WARRANTY
Good Earth Lighting® warrants this lighting fixture to be free from defects
in materials and workmanship for a period of (2) years from the date of
original purchase by the consumer.
We will repair or replace (at our option) the unit in the original color, and
style if available, or in a similar color and style if the original item has been
discontinued, without charge, exclusive of bulbs. Defective units must be
properly packed and returned to Good Earth Lighting® with a letter of
explanation and your original purchase receipt showing date of purchase.
Call us at 1-800-291-8838 to obtain a Return Authorization number and
an address where to ship your defective product. Note: No C.O.D.
shipments will be accepted. The liability of Good Earth Lighting® is in any
case limited to replacement of the defective light fixture product. Good
Earth Lighting® will not be liable for any other loss, damage, or injury
which is caused by the product. This limitation upon the liability of Good
Earth Lighting® includes any loss, damage, or injury which is (I) to person
or property or otherwise; (II) incidental or consequential in nature; (III)
based upon theories of warranty, contract, negligence, strict liability, tort,
or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair
BULB SOCKET
Contact Brush
Bulb Locking Slots
Solution
Replace bulb
Check if power supply is on
Check wiring
Check wiring connections
2-YEAR
3
of the product. This warranty gives you specific rights, and you may also
Fig. 3
have other rights which vary from state to state.
Printed in China
Distributed by: Good Earth Lighting, Inc., 5260 Capitol Drive,
Wheeling, IL 60090
LAMP CONTAINS MERCURY
Hg
Manage in accordance with disposal laws.
www.lamprecycle.org or 1-866-326-BULB
www.epa.gov/mercury/spills/index.htm#flourescent
1-888-STAR-YES
PETITE LAMPE DE PLACARD À CHAÎNE DE 12,7 CM
Des questions, des problèmes, des pièces manquantes? Avant de
retourner l'article au détaillant, visitez notre site web au
www.goodearthlighting.com/support.html ou appelez notre service
à la clientèle au 1 800 291-8838, entre 8 h et 17 h (HNC), du lundi au
vendredi.
CONTENU DE L'EMBALLAGE
Pièce
Description
Support du
A
luminaire
B
Diffuseur
C
Ampoule
Vis
D
E
Serre-fils
B
AVERTISSEMENTS ET MISES EN GARDE
AVERTISSEMENT
• Coupez la source d'alimentation principale depuis le panneau de
disjoncteurs ou de fusibles avant de retirer l'ancien luminaire.
MISE EN GARDE
• N'UTILISEZ PAS CE LUMINAIRE SUR UN CIRCUIT AVEC
GRADATEUR. Si le circuit est actuellement doté de gradateurs, vous
devez les retirer et les remplacer par des interrupteurs ordinaires. S'il est
doté d'un gradateur à trois voies, vous devez le remplacer par un
interrupteur à trois voies ordinaire. Si vous n'êtes pas certain de la
marche à suivre pour l'installation, nous vous recommandons de faire
appel à un électricien qualifié.
PRÉPARATION
Avant de commencer à installer le produit, assurez-vous d'avoir toutes les
pieces. Comparez le contenu de l'emballage avec la liste et le tableau
ci-dessus. S'il y a des pièces manquantes ou endommagées, ne tentez pas
d'assembler, d'installer ou d'utiliser le produit. Communiquez avec le service
à la clientèle pour obtenir des pièces de rechange.
Temps d'assemblage approximatif : 45 minutes
Outils nécessaires à l'assemblage
Tournevis à tête plate
Tournevis cruciforme
Coupe-fil
ARTICLE #313434
MODÈLE #GU4018-WH-I
Quantité
1
D
1
Trousse de quincaillerie
1
* La quincaillerie comprise peut
2
être différente de l'illustration.
2
A
Lunettes de sécurité
Chiffon doux
Ruban isolant
4
E
C
Escabeau
Pinces à dénuder
Pinces
Advertisement
