Heatrae Sadia Multipoint ECO 100L V 3kW Installation, Operation And Maintenance Manual page 21

Program
Program mode allows the user to define specific heating periods in a 24 hour day, for example they may be set to
match low tariff periods from the electricity provider. The heating period is determined by setting a "start" time period
and an "end" time period. Up to 3 time periods can be programmed for a 24 hour day.
If a program needs to be defined, programming mode is accessed at any time by long pressing
PROGRAM INITIAL SETTING
Program Period Setting
To suppress a period, simply set start time equal to end time. The period is suppressed.
PROGRAM RESET
A program reset can be performed by a general reset of the product (long press of MODE + SET). The program set is then
reset but other information such as the default o
perating mode and temperature return to default factory settings.
.
21