Advertisement
Operation Manual of Remote Controller (ARC91A151)
1
5. ECONO button:
ECONO operation enables efficient operation by limiting the maximum power consumption.
Press this button once to start the ECONO
set to medium (Not changeable).
Press once again to disable the ECONO operation, last set parameters memorised will be recalled which
were set before ECONO operation.
ECONO operation can only be set when unit is running. Pressing ON/OFF button causes the ECONO to
be cancelled.
ECONO operation functions in COOL mode only.
ECONO and POWER CHILL operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
6. SWING button:
User can adjust the airflow direction to increase your comfort. The flaps will begin to swing.
7. CHILD LOCK button:
Setting the CHILD LOCK disables all the buttons except the CHILD LOCK button.This function prevents
children from operating the remote controller by mistake. Press this button for about 5 seconds, CHILD
LOCK will be enabled and following the same manner, CHILD LOCK can be disabled.
8. POWER CHILL button:
POWER CHILL operation quickly Maximizes the cooling effect in COOL and DRYoperation only. In this
mode, the air conditioner operates at maximum capacity.When POWER CHILL is activated , the flaps will be
adjust at maximum air flow position.
POWER CHILL operation ends in 20 minutes. Then the system automatically operates again with the previous
settings which were used before POWER CHILL operation.
1. Signal transmitter
Sends signals to the indoor unit.
2. Display (LCD):
Displays the current settings.
(In this illustration, each section is shown with its displays on for the purpose of
explanation).
3. TEMPERATURE Adjustment button:
To change the temperature setting by pressing TEMP UP and TEMP DOWN buttons.
TEMP UP
Press
to raise the temperature and press
temperature.
COOL Operation :
DRY or FAN Operation : The temperature setting cannot be changed and is not
NOTE:
a) As per BEE guidelines, whenever air conditioner will be switched on from
remote, the default set temperature will be set as mentioned in below table :
4. ON/OFF button:
Press this button once to start the operation.
Press once again to stop the operation.
TEMP DOWN
46
to lower the
(Fixed) and fan speed is
Advertisement
