Chapter 4: Special Features; Customizing Your Remote Control; Setting Up Your Remote Control To Operate Your Vcr (Or Dvd); Setting Up Your Remote Control To Operate Your Cable Box - Samsung CL29A10 Owner's Instructions Manual

KS7A(ET)Latin_ENG 12/7/03
S
C h a p t e r F o u r P E C I A L
S
P E C I A L

Customizing Your Remote Control

Your TV comes equipped with a "universal" remote control. In addition to
controlling the TV, the universal remote can also operate a Set-Top Box, VCR, DVD and a
cable box (even if your VCR, DVD and cable box are made by manufacturers other than
Samsung).
Note: The remote control might not be compatible with all DVD players, VCRs, and Cable boxes.

Setting Up Your Remote Control to Operate Your VCR (or DVD)

1
Turn off your VCR(or DVD).
2
Press the MODE button and make sure that the VCR (or DVD)
LED is illuminated.
3
On your Samsung remote control, press the SET button.
4
Enter 3 digits of the VCR (or DVD) code listed on the next
page for your brand of VCR (or DVD).
5
Press the POWER button on the remote control. Your VCR
(or DVD) should turn on. If your VCR (or DVD) turns on, your
remote control is now set correctly.
6
Once your remote control is set up, press the MODE button
any time you want to use the remote to operate your VCR (or
DVD).
42
5:13 PM Page 42
F
E AT U R E S
F
E AT U R E S
The remote control has five "modes":
"TV", "STB","VCR", "Cable" and "DVD".
Press the "MODE" button to switch the
remote control to the "VCR" (or DVD)
mode.
Make sure you enter 3 digits of the
code, even if the first digit is a "0".
If more than one code listed, try the first
one.
If your VCR (or DVD) does not turn
on, repeat steps 2, 3, and 4, but try one of
the other codes listed for the brand of
your particular VCR (or DVD).
When your remote control is in the
"VCR" (or DVD) mode, the volume but-
tons still control your TV' s volume.
When your remote is in the "TV" mode,
the VCR (or DVD) control buttons
(PLAY, PAUSE, etc.) will still operate
your VCR (or DVD).