Samsung CL29A10 Owner's Instructions Manual page 18

KS7A(ET)Latin_ENG 12/7/03
I
N S TA L L AT I O N
A coaxial cable is usually included with a VCR. (If not, check your local electronics
store).
If you have a "mono" (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must con-
nect two cables.
Follow the instructions in "Viewing an External Signal Source" to view your VCR tape.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
18
4:53 PM Page 18
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.