Connecting A Second Vcr To Record From The Tv; Connecting A Dvd Player - Samsung CL29A10 Owner's Instructions Manual

KS7A(ET)Latin_ENG 12/7/03
I
N S TA L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
(The VCR input jacks might be either on the front or on back of the VCR.)
Refer to your VCR' s instructions for more information about how to record using this kind
of connection.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
20 Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
5:05 PM Page 20
1
Connect a set of audio
cables between the
AUDIO OUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
2
Connect a video cable
between the VIDEO OUT
jack on the TV and the
VIDEO IN jack on the
VCR.
1
Connect a set of audio
cables between the
AUDIO INPUT 2 jacks on
the TV and the AUDIO
OUT jacks on the DVD
player.
2
Connect a video cable
between the DVD-IN (Y,
Pb, Pr) jacks on the TV
and the DVD-OUT (Y, Pb,
Pr) jacks on the DVD
player.
To enable DVD viewing, connect video cables between the Y, Pb and Pr inputs on the TV and Y,Pb and Pr
outputs on the DVD player.
Note: For an explanation of Component video, see your DVD player's owner's manual.