Cleaning, Recharging, And Storage; Cleaning The Inside Of Chemical Tank; Cleaning The Pump Inside With Water - Maruyama MSB15LiZ Owner's/Operator's Manual

Chemical tank
The strainer can be attached or removed by
moving the strainer so that the inner rib on either
side is either parallel or perpendicular to the
chemical tank.

4. Cleaning, Recharging, and Storage

Cleaning the inside of chemical tank

Before cleaning, inspection and recharging, be sure to stop this unit.

Cleaning the pump inside with water

After cleaning the inside of the chemical tank, pour water into the tank again, run the pump, and
clean the pump inside and the nozzles until the sprayed mist of chemical solution is completely
replaced with clean water.
Cleaning the strainer
Cleaning the nozzle
Rib
Strainer
Chemical tank
To semi-secure the strainer, place it in the chemical
tank with the inner rib on either side either parallel or
perpendicular to the chemical tank, then turn it 45°.
This prevents the strainer from lifting when using
foaming chemicals.
- 8 -
Rib
nozzle tip
nozzle holder
45°
45°
Strainer
cap
packing
English