Cleaning, Maintenance, And Storage - Maruyama MS1600F Instruction Manual

4. Cleaning, Maintenance, and Storage

12
・After the operation, remove any fluid, drain the chemical solution
remaining in the tank, then perform cleaning. Future problems with
pump start can be prevented by normal regular cleaning.
CAUTION
For disposal of water after washing this machine,
special care must be take so that chemical disasters
will not occur same as the conditioner.
For the conditioner handling method, read the
instruction manual of the conditioner carefully.
・Remove the nozzle from the hose, lift the water intake
strainer from water, and run this machine at a low
speed with the valve opened to drain water (Be sure
to release pressure in the control devices).
CAUTION
Idling must be within one minute for machine
protection.
・To prevent damages due to freezing in winter season,
remove water completely before storage. Specifically,
loosen the drain plug shown in the figure, drain water
from the inside of the machine, and perform cleaning,
maintenance, and storage.
Drain plug
Remove oil after oil cools down.
・Before replacing oil, make sure that this machine has
stopped.
・For the first time replacement, replace oil after 50
hours have elapsed. Then, replace every 100 hours.
Since oil degrades, replace oil at least once a year
(SAE 10W-30 or equivalent) even if the 50 or 100
hours mark has not passed.
Drain plug
CAUTION