Advertisement
Cal.
YM92A
Small second hand
Crown
2H button
4H button
[*1] How to set the "0" position
Unscrew crown.
Press 2H button for 2 seconds.
Press 4H button repeatedly to set it to "0" position.
Press 2H button for 2 seconds.
Press 4H button repeatedly to set it to "0" position.
Press 2H button for 2 seconds.
Press 4H button repeatedly to set it to "0" position.
Press 2H button for 2 seconds here will allow you to resume the procedure again as
indicated by the arrow if necessary.
Push crown back to normal position, press into the case, and
screw in crown securely to ensure reliable water-resistance.
MOMENTUM SN34
Flatline Chronograph- Chrono Instructions
Second chronograph hand
Hour hand
Hour chronograph hand
0 click
Free
Chronograph Start/Stop
Restart
Chronograph Reset
Split
Split release
Pull crown out to the 2nd click position.
↓
1/20 second chronograph hand turns a full round and can
now be set to correct "0" position.
↓
↓
Second chronograph hand turns a full round and can now be
set to correct "0" position.
↓
↓
Hour and minute chronograph hand turns a full round and
can now be set to correct "0" position.
↓
↓
1/20 second chronograph hand
Minute hand
2H button
0 ® 1 ® 2
4H button
Minute chronograph hand
Crown position
1st click
Turn clockwise for date
change
Chronograph Start/Stop
Restart
Chronograph Reset
Split
Split release
31/Jul./'21
Date :
Rev. : 03
Crown
2nd click
Time setting
[*1]
[*1]
P.10-01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Momentum Flatline Chrono
Summary of Contents for Momentum Flatline Chrono
- Page 1 MOMENTUM SN34 31/Jul./'21 Date : Cal. YM92A Flatline Chronograph- Chrono Instructions Rev. : 03 Second chronograph hand 1/20 second chronograph hand Hour hand Minute hand 2H button Small second hand 0 ® 1 ® 2 Crown 4H button Hour chronograph hand...
- Page 2 Date : 31/Jul./'14 Cal. YM92A Operation-02 Rev. : 02 Chronograph function ・ The chronograph can measure up to 12 hours in 1/20 second increments. ・ After the chronograph is started or restarted or split time is released, 1/20 second chronograph hand moves about 10 minutes and automatically stops at the "0"...
Need help?
Do you have a question about the Flatline Chrono and is the answer not in the manual?
Questions and answers