Table of Contents
Advertisement
Available languages
Available languages
Fax +1 305 430 9692
OPERATION
Always remove the kettle from the power base (1) before filling it
•
or before any operation.
Open the lid (5) by pressing on the lid opening button (4) and fill
•
the tank with fresh water, paying attention not to fill under the
minimum mark or above the maximum mark indicated on the
glass housing of the kettle (7).
Close the lid by pressing it down until it you hear a click. Make
•
sure it closes correctly.
Make sure the spout filter is well in position, as else the auto-shut
•
off feature might not work.
Put the kettle onto the power base (1), plug into the wall socket,
•
and switch on using the digital control panel (3) on the handle.
To boil water
:
simply press on the "Boil" button (b) once, the light
•
ring (8) will come on with a red color, indicating that the
appliance is operating.
To heat water at a selected temperature, press the temperature
•
setting button (c) repeatedly, until selecting the temperature you
want. The light ring (8) will display a different color for each
temperature setting: green (140
yellow (175
o
F/80
o
C) and purple (195
LED light (a) will light on.
If the light ring (8) does not come on, check if the kettle is
•
positioned correctly on the base, and check if the base is
plugged in.
Do not open the lid while the water is heating or boiling.
•
The cordless water kettle will switch off automatically when the
•
water boils (100
o
C/212
been reached. A "beep" will sound indicating the temperature
has been reached and the kettle is switching off. However, you
can stop the appliance anytime by pressing the off button (b) or
by lifting the kettle from the power base.
CAUTION: Make sure that the lid is closed and the filter is correctly
and securely fitted before switching on the appliance. Failure to do
so will cause the kettle not to switch off!
For instant re-boiling, wait until water has cooled down and
•
switch on the appliance again.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the
frame.
o
F / 60
o
C), blue (160
o
F / 90
o
F) or when the selected temperature has
6
Assembly page 6/32
special
instruction
from
Team
Print only
o
F / 70
o
C),
o
C). The corresponding
JK 42656 - 120501
Advertisement
Table of Contents
