LTS VSIP8182W-28 Quick Start Manual

LTS VSIP8182W-28 Quick Start Manual

Network bullet cameras
Hide thumbs Also See for VSIP8182W-28:

Advertisement

Network Bullet Cameras
Quick Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VSIP8182W-28 and is the answer not in the manual?

Questions and answers

Summary of Contents for LTS VSIP8182W-28

  • Page 1 Network Bullet Cameras Quick Guide...
  • Page 2: Safety And Compliance Information

    Safety and Compliance Information Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read all of the Safety Instructions supplied with your equipment before installation and operation. Installation This device is a class A product and may cause radio interference. ...
  • Page 3: Maintenance

    friction, scratch and contamination, etc. In order to keep the cover clean, do not remove the protective film on the cover during mounting. After mounting is finished, remove the film before the device is powered on. Contact professionals for maintenance information. Do not ...
  • Page 4: Regulatory Compliance

    Regulatory Compliance FCC statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
  • Page 5 Battery Directive-2013/56/EC Battery in the product complies with the European Battery Directive 2013/56/EC.For proper recycling,return the battery to your supplier or to a designated collection point.
  • Page 6: Default Ip, Username And Password

    Default IP, Username and Password Default IP address: 192.168.1.13  Default username: admin  Default password: 123456  The default password is used for your first login. To ensure account security, please change the password after your first login. You are recommended to set a strong password (no less than eight characters).
  • Page 7: Cable Connection

    Type A Type B Sunshield 4.5mm 4.5mm 0.18" 0.18" 39mm 39mm (1.54") (1.54") Type C ∅4.5mm (0.18") 39mm (1.54") Cable Connection The appearance and tail cable may vary with device model. Type A...
  • Page 8 Power interface Network interface Sunshield IP Network Type B Power interface Network interface IP Network Type C Power interface Network interface IP Network...
  • Page 9: Mount Your Camera

    For specifications, see the latest product datasheets. Mount Your Camera Wall Mount You can adopt wall mountor ceiling mount and purchase hardware accessories by yourself. The following part takes wall mount as an example. Ceiling mount is similar to wall mount and therefore is omitted here.
  • Page 10 Knock the plastic rivets into the guide holes and ensure that they are tightened up. Locknut 5. Mount your camera onto 6. Adjust the monitoring direction. the wall and connect all cables. Adjust the opening of the Lead tapping screws through universal joints as required.
  • Page 11: Waterproof Components For An Rj45 Plug

    The preceding installation process is for concealed installation, during which holes are punched on the wall and cables are penetrated into the wall. If open installation is adopted, cables are not penetrated into the wall but threaded out from the outlet on one side of the base.
  • Page 12 1. Open your browser, input the IP address of your camera in the address bar and then press Enter to open the login page. 2. Enter the username and password and then click Login. Install the ActiveX at your first login. When the ...

Table of Contents