Samsung SyncMaster 320P Features & Specifications Manual page 9

400P / 400Pn Model
Mechanical Lay-out & Monitor Head
1181.0
971.0
Stand & Speaker
974.0
Components (WMB-4050PS)
WALL BRKT-PLATE:1 EA
Only use the components and accessories shipped with the product.
Wall Bracket Assembly & Wall Bracket & Wall Bracket Angle Adjustment (WMB-4050PS)
Check the installation diagram and mark the drill points on
the wall. Use the 5.0 mm bit to drill holes deeper than 35
mm. Fix each anchor in the corresponding hole. Match
each of the brackets and hinge holes to the correspond-
ing anchor holes and insert and tighten the 11 screws A.
118.0
60.5
295.0
STN-323TB
ASSY -HINGE (LEFT):1 EA
ASSY -HINGE (RIGHT):1 EA
Remove the 4 screws on the back of the product.
Insert the screw B into the plastic hanger.
1181.0
973.0
971.0
920.4(Wall Mount)
200.0
1 1 1
760.2
939.4
PLASTIC:4EA SCREW:11EA
1. Fix the product to the wall bracket.
2. Hold the product at the top in the center and pull it
3. You can adjust the bracket angle between -2˚ and 15˚.
104.0
136.6 80.0
SP-L400PB/S
SCREW:4EA SCREW:11EA
forward (direction of the arrow) to adjust the angle.
(See the figure to the right)
72.4
42.8
104.0