Table of Contents
Advertisement
3
Installation
Product must be installed by a qualified
person in accordance with the regulations
in force. The manufacturer shall not be held
responsible for damages arising from
procedures carried out by unauthorized
persons which may also void the warranty.
Preparation of location and electrical
and gas installation for the product is
the installer's responsibility.
DANGER:
The product must be installed in
accordance with all local gas and/or
electrical regulations.
DANGER:
Prior to installation, visually check if
the product has any defects on it. If
so, do not have it installed.
Damaged products cause risks for
your safety.
Before installation
To ensure that critical air gaps are
maintained under the appliance, we
recommend that this appliance is mounted
on a solid base and that the feet do not sink
into any carpet or soft flooring.
The kitchen floor must be able to carry the
weight of the appliance plus the additional
weight of cookware and bakeware and food.
•
It can be used with cabinets on either
side but in order to have a minimum
distance of 400 mm above hotplate
level allow a side clearance of 65mm
16/EN
between the appliance and any wall,
partition or tall cupboard.
•
It can also be used in a free standing
position. Allow a minimum distance of
650 mm above the hob surface.
•
"The cooker is designed to fit between
kitchen cabinets spaced
more apart. The space either side of
the cooker need only be sufficient to
allow withdrawal of the cooker for
servicing. It can be used with cabinets
on one side or both sides, as well as in
a corner setting. It can also be used
free standing".
•
(*) If a cooker hood is to be installed
above the cooker, refer to cooker hood
manufacturer' instructions regarding
installation height (min 650 mm).
•
Movement of your appliance is most
easily achieved by lifting the front as
follows and pulling towards. Open the
top oven door and the bottom oven
door sufficiently to allow a comfortable
grip on the underside front edge of the
oven roofs. While gripping, it should be
avoided to damage any grill elements
or oven interior furniture.
•
Movement of your appliance is most
easily achieved by lifting the front as
indicated in the drawing. Open the
oven door sufficiently to allow a
comfortable and safe grip on the
underside of the oven roof avoid
causing any damage to the grill
element or any internal parts of the
oven. Do not move by pulling on the
door handle or knobs. Move the
appliance a bit at a time until placed in
the position required.
1000 mm
or
Advertisement
Table of Contents
