Technical specifications Voltage / frequency 220-240 V~; 50 Hz Cable type / section min.H05V2V2-F 3 x 0,75 mm or equivalent Category of gas product Cat II 2H3+ Gas type / pressure NG G 20/20 mbar Total gas consumption 7.9 kW §...
Installation Product must be installed by a qualified Before installation person in accordance with the The hob is designed for installation into regulations in force. The manufacturer commercially available work tops. A shall not be held responsible for safety distance must be left between the damages arising from procedures appliance and the kitchen walls and carried out by unauthorized persons...
Minimum height to extractor as X -Minimum distance between the cut- recommend in hood instruction out and the side wall. manual. If not recommended in the Y -Minimum distance between the rear hood instruction manual, this height edge of the cut-out and the rear wall. should be at least 650 mm.