Table of Contents
Advertisement
3 Installation
Before installation
To ensure that critical air gaps are
maintained under the appliance, we
recommend that this appliance is
mounted on a solid base and that the
feet do not sink into any carpet or soft
flooring.
The kitchen floor must be able to carry
the weight of the appliance plus the
additional weight of cookware and
oe
and food.
) 750 mm min.
65 mm min
400mm
min ———
A Aa
distance must be left between
the appliance and the kitchen walls
and furniture. See figure (values in mm).
e
|t can be used with cabinets on
either side but in order to have a
minimum distance of 400 mm
above hotplate level allow a side
clearance of 65 mm between the
appliance and any wall, partition or
tall cupboard.
e
It can also be used in a free
standing position. Allow a
minimum distance of 750 mm
above the hob surface.
(*) If a cooker hood is to be
installed above the cooker, refer to
cooker hood manufacturer'
instructions regarding installation
height (Min 65cm).
The appliance corresponds to
device class 1, i.e. it may be
placed with the rear and one side
to kitchen walls, kitchen furniture
or equipment of any size. The
kitchen furniture or equipment on
the other side may only be of the
same size or smaller.
Any kitchen furniture next to the
appliance must be heat-resistant
(100 °C min.).
Installation and connection
9
9 | EN
Do not install the appliance next
to refrigerators or freezers. The
heat emitted by the appliance will
lead to an increased energy
consumption of cooling
appliances.
Appliance to be installed in
accordance with the local authority
requirements for gas, electricty
and any other authority having
jurisdiction.
Carry the appliance with at least
two persons.
Material damage!
The door and/or handle must not
be used for lifting or moving the
appliance.
The appliance must be placed
directly on the floor. It must not be
placed onto a base or a pedestal.
Advertisement
Table of Contents
