Hitachi PC-ARFH1E Installation And Operation Manual page 27

• Select Yes when the device is controlling the unit which it is attached. Jump to screen 6.
• Select No when the device is installed in a different site than the unit.
• Press OK button.
• Select No when the device acts as Room Thermostat only. It does not control the unit.
• Press OK button.
• Select No when the device is not used as a room thermostat.
• Select Yes, in zone 1/ Yes, in zone 2 / Yes, in both zones, depending on the number of circuits
controlled.
• When select Yes, in both zones, jump to screen 8.
• Press OK button.
• Select the number of circuits (1 or 2) .
• Press OK button.
PMEN0602 rev.0 - 05/2023



1
18