Table of Contents
Advertisement
◆ Installer mode
Icon
means that this menu is available only for installer, a special user with higher access
privileges to configure the system. In order to access the controller as Installer, "OK" and " "
buttons must be pressed for 3 seconds.
After that, the "Enter password" message is displayed.
The login password for the Installer is:
Press "OK" to confirm the password.
If the correct access code is entered, the installer mode icon appears on the notifications bar
(bottom line).
After 30 minutes of inactivity, it is necessary to repeat the log in process. To exit the Installer mode
and return to the unit menu, hold down the " " button for 3 seconds or go to the "Return to user
mode" on the main menu.
NOTE
The following chapters explain the special settings the Installer can edit. It is important to
understand that the Installer can also perform all the actions available for the typical user.
PMEN0602 rev.0 - 05/2023
Right
, Down
, Left
Installer mode icon
, Right
1
16
Advertisement
Table of Contents
